Decking
Duofuse decking has been known for many years for its high quality and many advantages. That is why they are frequently used in gardens but also in large new-build and renovation projects. The decking boards are available in hollow and solid variants, in various colours and patterns.
Some unique advantages of Duofuse decking: The boards become less slippery than wooden boards when wet, have a very low discolouration rate and are low maintenance.
The combination of hollow deck boards with the Duofuse aluminium sub-structure makes for one of the lightest-weight structures on the market. Ideal for roof terraces and balconies.
In short, a solution for every situation. Get inspiration and information from a Duofuse dealer.
Ecologically responsible and local production
Duofuse consists of +/- 50% wood from sustainable forestry in Europe. This is guaranteed by the highest degree of PEFC certification.
The plastic part is PVC for a reason: This is because this is a very strong plastic which, unlike many other materials, can be reused up to 10 times combined with a long lifespan.
The decking boards are made from raw material to finished product at a single production site in Belgium. Production waste can be reused to produce new material. As a result, Duofuse has a lower CO2 footprint and is a more sustainable alternative to hardwood and composite from other parts of the world.
Available colours
Duofuse decking and decking boards are available in 4 timeless, attractive shades. Up to 6 to 8 weeks after being installed, slight variations in colour may occur, after which the colour will stabilise and stay the same for the rest of the product’s life. Even after many years of exposure and use, your decking boards will still look as good as new.
Versions
Duofuse composite decking boards come in hollow as well as solid form, and they also come with various finishes: smooth brushed finish, wood grain, fine or rough ribbed or with different finishing on either side.
* Double-sided finish: a refined and a robust finish
** Double-sided finish: brushed surface and a wood grain finish
*** Double-sided finish: brushed surface and a refined finish
Components
Decking boards and decking made from WPC are part of a complete system with all the necessary fittings and accessories to make the lives of professional workmen or Handy Harry a whole lot easier. Alongside synthetic decking boards, at Duofuse we also have all the requisite support beams, adjustable beams, skirting boards, profiles and clips.
| Article | Colour | Material | Dimensions (BxH) | Length | ||
|---|---|---|---|---|---|---|
| hollow board DFD 162* A |
Graphite Black
Stone Grey
Tropical Brown
Wenge Brown
|
PVC | 162 x 28 mm | Standard length of all boards and profiles : 4 m (other dimensions on request) |
||
| hollow board DFDE 162** B | PVC | 162 x 28 mm | ||||
| solid board DFDS 162*** C | PVC | 162 x 28 mm | ||||
| full board DFD 140* D | PVC | 140 x 23 mm | ||||
| beam DFB048 E | PVC | 48,5 x 35 mm | ||||
| skirt DFS076 F | PVC | 76 x 10 mm | ||||
| ALU L profile DFLA076G |
Ral 7021
Ral 7030
Ral 8017
Ral 8019
|
Anodised aluminium | 76 x 37 mm | |||
| CLIPS |
DFC001 H
standard clip 
|
DFC002 I
butting clip 
|
DFC004 J
starter and finishing clip 
|
|||
Advantages
Will not rot, swell, splinter or split
If installed correctly you will enjoy your decking for years without any sorrow and you can walk and play barefoot on the decking in safety.
Slip resistant, brushed surface
Thanks to the brushed surface the decking is far less slippery than a wooden decking.
Invisible fixing
No screws or nails that distort the view or hurt you. Thanks to the specially designed clips boards are fastened to the wood composite beams.
Different heights possible
The Duofuse® beam can be installed in 2 ways, so that decking can be placed at 35 mm or 48,5 mm from ground. For higher placements or placement on roof terraces you can use polypropylene pedestals that allow heights of more than 200 mm. When using these pedestals, however, you cannot use wood beams, since it is not a structural element.
Decking boards configurator
Calculate the number of Duofuse components you need for your decking with our online configurator
Aluminium substructure
The aluminium substructure guarantees an easy and fast assembly of the Duofuse® composite decking boards. Furthermore the Duofuse® aluminium substructure is also suitable for other types of decking boards with grooves of minimum 3.5mm height and 8mm depth.
GUARANTEED TIME SAVING ON THE ASSEMBLY
With the Duofuse® aluminium substructure you will save at least 50% on installation time compared to traditional screwed systems.
IDEAL FOR FLOATING STRUCTURES
This system is particularly suitable for applications by which the substructure must be installed floating. The Duofuse® aluminium substructure is the ideal solution for people who want an efficient, durable and price conscious installation.
ADVANTAGES
• Faster assembly
• Straight beams
• Light weight
• Dimensionally stable
• Weatherproof
• Easy installation
• 100% recyclable
• Pre-drilling not necessary
• Invisible fixing
• Local disassembly possible
Applications
Parts
| Article | Material | Dimensions (WxH) | Length |
|---|---|---|---|
| Aluminium beam DFBA040 | Aluminium | 40 x 40mm | 4m |
| Synthetic clip DFC005 | Synthetic | ||
| Starter and finishingclip DFC006 | Steanless steel | ||
| Joiner piece DFJP (bolt and nut incl.) | Steanless steel | ||
| Multifunctional corner DFMC (bolt and nut incl.) | Steanless steel | ||
| Rubber protection tile DFR90x90 | Rubber | 90 x 8mm | 90mm |
Adjustable pedestals polypropylene
For higher placements or placement on roof terraces you can use
polypropylene pedestals that allow heights of more than 200 mm. When
using these pedestals, however, you cannot use wood composite beams,
since it is not a structural element.
